F44 Union Tee SAE J512 #010401 SAE 45°flare Fittings Adapter Connector 244F T2 144F
Forged Flare Tee
SAE #010401 244F T2 144F
Accpet: Custom Made for Any other Sizes and Types
| PART# | TUBE O.D | D | M | N |
| F44-02 | 1/8 | .079 | .67 | .67 |
| F44-03 | 3/16 | .126 | .75 | .75 |
| F44-04 | 1/4 | .189 | .78 | .78 |
| F44-05 | 5/16 | .219 | .91 | .91 |
| F44-06 | 3/8 | .282 | 1.00 | 1.00 |
| F44-08 | 1/2 | .408 | 1.16 | 1.16 |
| F44-10 | 5/8 | .500 | 1.41 | 1.41 |
| F44-12 | 3/4 | .625 | 1.64 | 1.64 |
Forged Flare Tee SAE 45 Degree Flare Fittings
Interchangeability for reference
Parker : 144F-3 144F-4 244F-4 144F-5 144F-6 144F-8 144F-10
Eaton/WeatherHead : 44×3 44×4 44×6 44×8
Midland :10-157 10-158 10-159 10-159B*10-160 10-161 10-162 10-163 10-164 10-165
SABE’s 45° flare fittings are easily adaptable and provide users with the flexibility to connect to our most popular hose and tubing products. SABE’s flare fittings are an economical choice for a metal-to-metal seal, and are ideal for applications including refrigerant lines, propane, fuels, adapters, and natural gas.
SABE’s All brass 45° flare fitting that resists mechanical pullout. Meets functional requirements of SAEJ512and J513.
Literature and Reference Materials
SAE45° Flare Fittings & Adapters catalogue
SAE 45° Flare Fittings & Adapters
Industry Standard - SAE J512 45° Flare
Specification
- Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
- Working Pressure: up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing – up to 5000 psi with bundy-weld (double flared) and 3500 psi with copper tubing, depending on size. Obviously, Temperature and type of tubing used are important factors.
Installation Instructions
- Cut tubing to desired lenght. Make sure all burrs are removed and ends are cut square.
- Slide nut on tube. Threaded and “A” of nut must face out.
- Flare end of tube with a 45° flaring tool. a-Measure flare diameter b-Examine flare for excessive thin out.
- Lubricat threads and assemble to fitting body. Nut should be turned hand out.
- Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
SAE 45 Degree Flare Fittings – Brass Material
Applications
LP and natural gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Used on low, medium and high pressure lines under the most adverse conditions, compatible with copper, brass, aluminum and steel hydraulic tubing that can be flared.
Features
- Construction – Two piece body and nut, straight barstock & forged fittings.
- Good Vibration resistance – use long nut when greater vibration resistance is required.
- Conformance – Heavy duty flare fittings are manufactured to SAE specifications, Meets specifications and standards of ASA, ASME, SAE, and MS (Military standards).
- Reusability – Can be assembled and re-assembled repeatedly & Resists mechanical pull-out.
Copper, brass, aluminum and steel hydraulic tubing that can be flared.
Tolerance
+/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical.
