F49 Male Pipe Elbow SAE J512 #010202 SAE 45°flare Fittings Adapter Connector 249F 49 E1 149F

 SAE #010202

Interchangeability for reference

Parker : 149F-2-2 149F-3-2 249F-3-2 149F-4-2 249F-4-2 149F-4-4 249F-4-4 149F-4-6 249F-4-6 149F-5-2 249F-5-2 149F-5-4 249F-5-4 149F-5-6 149F-6-2 249F-6-2 149F-6-4 249F-6-4 149F-6-6 249F-6-6 149F-6-8 249F-6-8 149F-6-12 149F-8-4 149F-8-6 249F-8-6 149F-8-8 249F-8-8 149F-8-12 149F-10-6 149F-10-8 249F-10-8 149F-10-12 149F-12-8*149F-12-12*149F-14-12

Eaton/WeatherHead : 49×2 49×3 49×4 49x4x4 49×4×6 49×5 49x5x4 49x6x2 49×6 49x6x6 49x6x8 49x8x4 49×8 49x8x8 49x10x6 49×10 49×12 49x12x12

Midland : 10-283 10-283B*10-284 10-284B*10285 1028 10-286B*10-287 10-287B*10-288 10-289 10-290 10-290B*10-291 10-291B*10-292 10-293 10-293B*10-294 10-294B*10-295 10-295B*029 10-297 10-298 10-298B*10-299 10-299B*10300 10-300B*10-301 10-311 10-302 10-302B*10-303 10-30BB*10-304 10305 10306 10-306B*10307 10308 1030

attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.

Actual O.D. of Flare Fittings

SAE 45° Flare Fittings & Adapters

Industry Standard - SAE J512 45° Flare

Specification

1. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
2. Working Pressure: up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing – up to 5000 psi with bundy-weld (double flared) and 3500 psi with copper tubing, depending on size. Obviously, Temperature and type of tubing used are important factors.

Installation Instructions

1. Cut tubing to desired lenght. Make sure all burrs are removed and ends are cut square.
2. Slide nut on tube. Threaded and “A” of nut must face out.
3. Flare end of tube with a 45° flaring tool. a-Measure flare diameter b-Examine flare for excessive thin out.
4. Lubricat threads and assemble to fitting body. Nut should be turned hand out.
5. Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.

SAE 45 Degree Flare Fittings – Brass Material

Applications

LP and natural gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Used on low, medium and high pressure lines under the most adverse conditions, compatible with copper, brass, aluminum and steel hydraulic tubing that can be flared.

Features

1. Construction – Two piece body and nut, straight barstock & forged fittings.
2. Good Vibration resistance – use long nut when greater vibration resistance is required.
3. Conformance – Heavy duty flare fittings are manufactured to SAE specifications, Meets specifications and standards of ASA, ASME, SAE, and MS (Military standards).
4. Reusability – Can be assembled and re-assembled repeatedly & Resists mechanical pull-out.

Copper, brass, aluminum and steel hydraulic tubing that can be flared.

Tolerance

+/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical