RN Ferruleless Fitting Nut Rapid Tube Adapter Brass Fittings
| 1703 5/3-M7X0.75 | 5/3. | M7x0.75 | 5.1 | 8.8 | 8,5 | 8 |
| 1703 6/4-M8x0.75 | 6/4. | M8x0.75 | 6.1 | 9.8 | 8,5 | 9 |
| 1703 6/4-M10x1 | 6/4. | M10x1 | 6.1 | 13.3 | 10 | 12 |
| 1703 8/6-M12X1 | 8/6. | M12x1 | 8.2 | 15.5 | 10 | 14 |
| 1703 10/8-M14x1 | 10/8. | M14x1 | 10.15 | 17.5 | 13 | 16 |
| 1703 12/1O-M16x1 | 12/10. | M16x1 | 12.2 | 21 | 13.5 | 19 |
| 1703 15/12.5-,M20x1 | 15/12.5. | M20x1 | 15.2 | 24.5 | 16 | 22 |
Interchangeability for reference
Camozzi: 17035/3-M7x0,75 1703 6/4-M8x0,75 1703 6/4-M10x1 1703 8/6-M12x1 1703 10/8-M14x1 1703 12/10-M16x1 1703 15/12,5-M20x1
Norgren: 240010400 240010500 240010600 240010800 240011000 240011200
Pneumax Group : 3100400 3100500 3100608 3100610 3100800 3101000 3101200 3101500
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.
Brass Pneumatic Rapid Tube Fittings / Reusable Tubing Fittings
Interchange With
Camozzi – Rapid Fittings, Norgren – Push-On Tube Fittings, Pneumax – Quick Fittings
Features
- Ideally use in vacuum systems & confined spaces where tight bend radii are required.
- For simple and quick connection of pneumatic circuits even without the use of a spanner.
- Unique barb shape ensures good grip on tube even if just tightened by hand.
- The special shape of the guiding cone avoid that the tube rupture accidentally.
- Corrosion resistant thanks to Nickel plated.
- Tubing locking nuts included.
- Recommend Plastic Tube: PA polyethylene braided PVC rilsan polyurethane, also be used with rigid PA tubes.
Specification
- Material: Nickel-Plated Brass.
- Media: Compressed air low pressure fluids as Computer Water Cooling System.
- Thread: BSPP & BSPP as standard, other styles available on request.
- Operating pressure: Vacuum -15 bar (mainly depending on tube’s endurance)
- Temperature: -18°C to +70°C. Mainly as per tube performance.
Installation Instructions
|
|
|
|
- Place the knurled nut over the tube. See figure 1
- Push the tube over the barbed end of the fitting up to the tube stop. See figure 2
- Screw the knurled nut onto the fitting until finger or wrench tight. (The hexagon on the nut is to aid release) See figure 3
Click Here For Overview Of Brass Screw-On Compression Fittings
| Quick Fittings – Tube To Pipe | Quick Fittings – Tube To Tube | Quick Fittings – Banjo | Quick Fittings – Compact |
|
|
|
|
 |
