PUB Bulkhead Union Plastic Poly Push In Tube to Tube Adapter Connector Fittings
| Model Type — PM Bulkhead Union | |||||||||||||
 |
Metric Tube | Inch Tube | |||||||||||
| PUB04 | PUB5/32 | ||||||||||||
| PUB06 | PUB1/4 | ||||||||||||
| PUB08 | PUB5/16 | ||||||||||||
| PUB10 | PUB3/8 | ||||||||||||
| PUB12 | PUB1/2 | ||||||||||||
| PUB14 | |||||||||||||
| Bulkhead Union | PUB16 | ||||||||||||
Taper Thread
| MODEL | A | B | C | D | E | F | H1(Hex) | H2(Hex) Weight(g) |
| PUB04-M5 | 4 | M5 0.8P | 6 | 24.5 | m12*1 | 12.5 | 10 | 5.9 |
| PUB04-M6 | 4 | M6*1.0p | 6 | 24.5 | m12*1 | 12.5 | 10 | 6.5 |
| PUB04-01 | 4 | G1/8 | 9 | 27.2 | m12*1 | 12.5 | 14 | 5.8 |
| PUB04-02 | 4 | G1/4 | 10.5 | 28.7 | m12,1 | 12.5 | 17 | 12.8 |
| PUB06-M5 | 6 | M5*1.0p | 8.0 | 25.0 | m14*1 | 13.0 | 17 | 6.7 |
| PUB06-M6 | 6 | M6*1.0p | 8 | 25 | m14*1 | 13 | 17 | 7.3 |
| PUB06-01 | 6 | G1/8 | 9 | 27.95 | m14*1 | 13 | 17 | 6.8 |
| PUB06-02 | 6 | G1/4 | 10.5 | 29.45 | m14*1 | 13 | 17 | 10.4 |
| PUB06-03 | 6 | G3/8 | 12 | 30.95 | m14,1 | 13 | 19 | 20.7 |
| PUB06-04 | 6 | G1/2 | 14 | 32.95 | m14*1 | 13 | 24 | 38.8 |
| PUB08-01 | 8 | G1/8 | 9 | 29 | m16*1 | 14 | 19 | 10.4 |
| PUB08-02 | 8 | G1/4 | 10.5 | 30.5 | m16,1 | 14 | 19 | 9.7 |
| PUB08-03 | 8 | G3/8 | 12 | 32 | m16″1 | 14 | 19 | 18.4 |
| PUB08-04 | 8 | G1/2 | 14 | 34 | m16*1 | 14 | 24 | 33.3 |
| PUB1O-O1 | 10 | G1/8 | 9 | 31.5 | m20*1 | 15 | 21 | 14.8 |
| PUB10-02 | 10 | G1/4 | 10.5 | 32.5 | m20*1 | 15 | 21 | 16.5 |
| PUB10-03 | 10 | G3/8 | 12 | 34 | m20,1 | 15 | 21 | 19.6 |
| PUB10-04 | 10 | G1/2 | 14 | 36.5 | m20,1 | 15 | 24 | 31.4 |
| PUB12-01 | 12 | G1/8 | 9 | 33.6 | m22,1 | 16 | 24 | 19.4 |
| PUB12-02 | 12 | G1/4 | 10.5 | 35.1 | m22,1 | 16 | 24 | 19.7 |
| PUB12-03 | 12 | G3/8 | 12 | 36.6 | m22*1 | 16 | 24 | 20.8 |
| PUB12-04 | 12 | G1/2 | 14 | 38.6 | m22,1 | 16 | 24 | 29 |
Bulkhead Straight
| MODEL | A | B | C | D | H1(Hex) | Weight(g) |
| PUB04 | 4 | M12*1 | 22 | 34.4 | 14 | 26.5 |
| PUB06 | 6 | M14*1 | 22.5 | 35.4 | 17 | 32.4 |
| PUB08 | 8 | M16*1 | 24 | 38 | 19 | 32 |
| PUB10 | 10 | M20*1 | 26 | 42 | 24 | 51.8 |
| PUB12 | 12 | M22*1 | 28 | 46.2 | 27 | 64.7 |
| PUB14 | 14 | M24*1 | 28.4 | 47 | 29 | 72 |
| PUB16 | 16 | M27*1 | 30 | 47.4 | 32 | 85 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
