PRT Male Run Tee Plastic Poly Push In Tube to Pipe Adapter Connector Fittings
| MODEL | *A | B | C | D | E | F | H1(Hex) | Weight(g) |
| PRT04-M5 | 4 | M5*0 8d | 4 | 21 | 18 | 10 | 10.1 | |
| PRT04-M6 | 4 | M6*1.0p | 4.5 | 21 | 18 | 10 | 10.2 | |
| PRT04-01 | 4 | R1/8 | 7.5 | 22.9 | 18 | 10 | 10.1 | |
| PRT04-02 | 4 | R1/4 | 9 | 24.4 | 18 | 14 | 14.1 | |
| PRT06-M5 | 6 | M5″0.8p | 4 | 24 | 19.9 | 12 | 14.7 | |
| PRT06-M6 | 6 | M6*1.0p | 4.5 | 24.5 | 19.9 | 12 | 14.6 | |
| PRT06-01 | 6 | R1/8 | 7.5 | 25.4 | 19.9 | 12 | 15.1 | |
| PRT06-02 | 6 | R1/4 | 9 | 26.9 | 19.9 | 14 | 18 | |
| PRT06-03 | 6 | R3/8 | 10.5 | 28.4 | 19.9 | 17 | 22.9 | |
| PRT06-04 | 6 | R1/2 | 12 | 29.9 | 19.9 | 21 | 30.3 | |
| PRT08-01 | 8 | R1/8 | 7.5 | 26 | 22.9 | 14 | 19.2 | |
| PRT08-02 | 8 | R1/4 | 9 | 27.5 | 22.9 | 14 | 19.9 | |
| PRT08-03 | 8 | R3/8 | 10.5 | 29 | 22.9 | 17 | 25.4 | |
| PRT08-04 | 8 | R1/2 | 12 | 30.5 | 22.9 | 21 | 32.9 | |
| PRT10-01 | 10 | R1/8 | 7.5 | 29 | 27.2 | 17 | 30.2 | |
| PRT10-02 | 10 | R1/4 | 9 | 30.5 | 27.2 | 17 | 31 | |
| PRT10-03 | 10 | R3/8 | 10.5 | 32 | 27.2 | 17 | 35 | |
| PRT10-04 | 10 | R1/2 | 12 | 33.5 | 27.2 | 21 | 42.2 | |
| PRT12-01 | 12 | R1/8 | 7.5 | 31 | 29.2 | 19 | 38.6 | |
| PRT12-02 | 12 | R1/4 | 9 | 32.5 | 29.2 | 19 | 40.6 | |
| PRT12-03 | 12 | R3/8 | 10.5 | 34 | 29.2 | 19 | 42.6 | |
| PRT12-04 | 12 | R1/2 | 12 | 25.2 | 31.5 | 21 | 48.1 | |
| PRT14-03 | 14 | R3/8 | 10.5 | 40.7 | 31 | 21 | 61.9 | |
| PRT14-04 | 14 | R1/2 | 12 | 42.2 | 31 | 21 | 65.9 | |
| PRT16-03 | 16 | R3/8 | 10.5 | 41.5 | 32.5 | 24 | 74.5 | |
| PRT16-04 | 16 | R1/2 | 12 | 43.2 | 32.5 | 24 | 66.1 |
ADD O-ring
| MODEL | A | B | C | D | E | F | H1(Hex) | Weight(g) |
| PRT04-G1 | 4 | G1/8 | 5.5 | 22.2 | 18 | 14 | 12 | 12.3 |
| PRT04-G2 | 4 | G1/4 | 6 | 22.6 | 18 | 17 | 14 | 17 |
| PRT06-G1 | 6 | G1/8 | 5.5 | 24.6 | 19.9 | / | 14 | 17.2 |
| PRT06-G2 | 6 | G1/4 | 6 | 25.1 | 19.9 | 17 | 14 | 17.7 |
| PRT06-G3 | 6 | G3/8 | 7 | 26.1 | 19.9 | 21 | 17 | 23.1 |
| PRT06-G4 | 6 | G1/2 | 9 | 28.1 | 19.9 | 24 | 19 | 27.5 |
| PRT08-G1 | 8 | G1/8 | 5.5 | 25.2 | 22.9 | / | 14 | 19.6 |
| PRT08-G2 | 8 | G1/4 | 6 | 25.7 | 22.9 | 17 | 14 | 20.5 |
| PRT08-G3 | 8 | G3/8 | 7 | 26.7 | 22.9 | 21 | 17 | 25.6 |
| PRT08-G4 | 8 | G1/2 | 9 | 28.7 | 22.9 | 24 | 19 | 30.1 |
| PRT10-G1 | 10 | G1/8 | 5.5 | 28.7 | 27.2 | / | 17 | 29.9 |
| PRT10-G2 | 10 | G1/4 | 6 | 29 | 27.2 | / | 17 | 30.5 |
| PRT10-G3 | 10 | G3/8 | 7 | 30.2 | 27.2 | 21 | 17 | 34 |
| PRT10-G4 | 10 | G1/2 | 9 | 32.2 | 27.2 | 24 | 19 | 40.4 |
| PRT12-G1 | 12 | G1/8 | 5.5 | 30.5 | 29.2 | / | 19 | 37 |
| PRT12-G2 | 12 | G1/4 | 6 | 31 | 29.2 | / | 19 | 39.6 |
| PRT12-G3 | 12 | G3/8 | 7 | 32 | 29.2 | 21 | 19 | 42.8 |
| PRT12-G4 | 12 | G1/2 | 9 | 34 | 29.2 | 24 | 21 | 48.3 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
