POM Round Male Straight Plastic Poly Push In Tube to Pipe Adapter Connector Fittings
| MODEL | A | B | C | D | E | F | H1(Hex) | H2(Hex) Weight(g) |
| POM04 – M5 | 4 | M5 0.8p | 4 | 22 | 1 0 | 2.5 | 5.9 | |
| POM04-M6 | 4 | M6 1.0p | 4.5 | 22 | 10 | 2.5 | 6.5 | |
| POM04-01 | 4 | R1/8 | 7.5 | 19.3 | 10 | 3 | 5.8 | |
| POM04-02 | 4 | R1/4 | 9 | 20.3 | 14 | 3 | 12.8 | |
| POM06-M5 | 6 | M5*0.8p | 4 | 22.3 | 12 | 2.5 | 6.7 | |
| POM06-M6 | 6 | M6*1.0p | 4.5 | 23.5 | 12 | 2.5 | 7.3 | |
| POM06-01 | 6 | R1/8 | 7.5 | 21.8 | 12 | 4 | 6.8 | |
| POM06-02 | 6 | R1/4 | 9 | 20.8 | 14 | 5 | 10.4 | |
| POM06-03 | 6 | R3/8 | 10.5 | 23 | 17 | 4 | 20.7 | |
| POM06-04 | 6 | R1/2 | 12 | 24.5 | 21 | 5 | 38.8 | |
| POM08-01 | 8 | R1/8 | 7.5 | 26.2 | 14 | 5 | 10.4 | |
| POM08-02 | 8 | R1/4 | 9 | 24 | 14 | 6 | 9.7 | |
| POM08-03 | 8 | R3/8 | 10.5 | 23.8 | 17 | 6 | 18.4 | |
| POM08-04 | 8 | R1/2 | 12 | 25.5 | 21 | 6 | 33.3 | |
| POM10-01 | 10 | R1/8 | 7.5 | 28.5 | 17 | 5 | 14.8 | |
| POM10-02 | 10 | R1/4 | 9 | 30 | 17 | 5 | 16.5 | |
| POM10-03 | 10 | R3/8 | 10.5 | 28.6 | 17 | 8 | 19.6 | |
| POM10-04 | 10 | R1/2 | 12 | 27.5 | 21 | 8 | 31.4 | |
| POM12-01 | 12 | R1/8 | 7.5 | 31 | 19 | 5 | 19.4 | |
| POM12-02 | 12 | R1/4 | 9 | 31.7 | 19 | 6 | 19.7 | |
| POM12-03 | 12 | R3/8 | 10.5 | 30.2 | 19 | 8 | 20.8 | |
| POM12-04 | 12 | R1/2 | 12 | 29.1 | 21 | 10 | 29 |
Oring
| MODEL | A | B | C | D | E | F | H1(Hex) | H2(Hex) Weight(g) |
| POM04-G1 | 4 | G1/8 | 5.5 | 20 | 14 | 3 | 7.8 | |
| POM04-G2 | 4 | G1/4 | 6 | 20.6 | 17 | 3 | 11.9 | |
| POM06-G1 | 6 | G1/8 | 5.5 | 24.4 | 14 | 4 | 12 | |
| POM06-G2 | 6 | G1/4 | 6 | 21.3 | 17 | 5 | 17.5 | |
| POM06-G3 | 6 | G3/8 | 7 | 20.7 | 21 | 5 | 17.6 | |
| POM06-G4 | 6 | G1/2 | 9 | 22.7 | 24 | 5 | 25 | |
| POM08-G1 | 8 | G1/8 | 5.5 | 25 | 14 | 5 | 11.7 | |
| POM08-G2 | 8 | G1/4 | 6 | 22.5 | 17 | 6 | 12.4 | |
| POM08-G3 | 8 | G3/8 | 7 | 22.3 | 21 | 6 | 17.7 | |
| POM08-G4 | 8 | G1/2 | 9 | 23.8 | 24 | 6 | 30.9 | |
| POM10-G1 | 10 | G1/8 | 5.5 | 27.3 | 17 | 5 | 15.5 | |
| POM10-G2 | 10 | G1/4 | 6 | 28 | 17 | 6 | 18.5 | |
| POM10-G3 | 10 | G3/8 | 7 | 25.8 | 21 | 8 | 22.1 | |
| POM10-G4 | 10 | G1/2 | 9 | 25.1 | 24 | 8 | 29.1 | |
| POM12-G1 | 12 | G1/8 | 5.5 | 31 | 19 | 6 | 20 | |
| POM12-G2 | 12 | G1/4 | 6 | 30.8 | 19 | 6 | 25.9 | |
| POM12-G3 | 12 | G3/8 | 7 | 31 | 21 | 8 | 26.6 | |
| POM12-G4 | 12 | G1/2 | 9 | 29.7 | 24 | 8 | 32.2 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
