PLL Extend Male Elbow Plastic Poly Push In Tube to Pipe Adapter Connector Fittings
| MODEL | A | B | C | D | E | F | H1(Hex) | H2(Hex) Weight(g) |
| PLL04-M5 | 4 | M5*0.8p | 4 | 35 | 18 | 10 | 16 | |
| PLL04-M6 | 4 | M6*1.0p | 4.5 | 35.5 | 18 | 10 | 15.6 | |
| PLL04-01 | 4 | R1/8 | 7.5 | 36.4 | 18 | 10 | 14.9 | |
| PLL04-02 | 4 | R1/4 | 9 | 37.9 | 18 | 14 | 25.7 | |
| PLL06-M5 | 6 | M5*0.8p | 4 | 44.5 | 19.9 | 12 | 24.8 | |
| PLL06-M6 | 6 | M6*1.0p | 4.5 | 45 | 19.9 | 12 | 24.9 | |
| PLL06-01 | 6 | R1/8 | 7.5 | 40.6 | 19.9 | 14 | 24.6 | |
| PLL06-02 | 6 | R1/4 | 9 | 42.6 | 19.9 | 14 | 30.9 | |
| PLL06-03 | 6 | R3/8 | 10.5 | 44.6 | 19.9 | 17 | 43.2 | |
| PLL06-04 | 6 | R1/2 | 12 | 45.9 | 19.9 | 21 | 57.9 | |
| PLL08-01 | 8 | R1/8 | 7.5 | 41.2 | 22.9 | 14 | 35.7 | |
| PLL08-02 | 8 | R1/4 | 9 | 43.2 | 22.9 | 14 | 32.5 | |
| PLL08-03 | 8 | R3/8 | 10.5 | 45.2 | 22.9 | 17 | 44.9 | |
| PLL08-04 | 8 | R1/2 | 12 | 46.5 | 22.9 | 21 | 59.2 | |
| PLL10-01 | 10 | R1/8 | 7.5 | 48.5 | 27.2 | 17 | 59.5 | |
| PLL10-02 | 10 | R1/4 | 9 | 48.5 | 27.2 | 17 | 54.9 | |
| PLL10-03 | 10 | R3/8 | 10.5 | 51.2 | 27.2 | 17 | 53.2 | |
| PLL10-04 | 10 | R1/2 | 12 | 51.5 | 27.2 | 21 | 70.3 | |
| PLL12-01 | 12 | R1/8 | 7.5 | 51 | 29.2 | 19 | 77.7 | |
| PLL12-02 | 12 | R1/4 | 9 | 52.5 | 29.2 | 19 | 74.6 | |
| PLL12-03 | 12 | R3/8 | 10.5 | 54 | 29.2 | 19 | 71.1 | |
| PLL12-04 | 12 | R1/2 | 12 | 55.5 | 31.5 | 21 | 81.8 |
| MODEL | A | B | C | D | E | F | H1(Hex) | H2(Hex) Weight(g) |
| PLL04-G1 | 4 | G1/8 | 5.5 | 34.4 | 18 | 14 | 32 | |
| PLL04-G2 | 4 | G1/4 | 6 | 34.9 | 18 | 17 | 35.4 | |
| PLL06-G1 | 6 | G1/8 | 5.5 | 40.6 | 19.9 | 14 | 33.4 | |
| PLL06-G2 | 6 | G1/4 | 6 | 41.6 | 19.9 | 17 | 44.2 | |
| PLL06-G3 | 6 | G3/8 | 7 | 42.4 | 19.9 | 21 | 63.5 | |
| PLL06-G4 | 6 | G1/2 | 9 | 44.4 | 19.9 | 24 | 74.9 | |
| PLL08-G1 | 8 | G1/8 | 5.5 | 41.2 | 18.4 | 17 | 34.9 | |
| PLL08-G2 | 8 | G1/4 | 6 | 42.2 | 18.4 | 17 | 45.7 | |
| PLL08-G3 | 8 | G3/8 | 7 | 43 | 18.4 | 21 | 64.6 | |
| PLL08-G4 | 8 | G1/2 | 9 | 45 | 18.4 | 24 | 76.9 | |
| PLL10-G1 | 10 | G1/8 | 5.5 | 46.7 | 21.7 | 17 | 56.8 | |
| PLL10-G2 | 10 | G1/4 | 6 | 47.2 | 21.7 | 17 | 54.4 | |
| PLL10-G3 | 10 | G3/8 | 7 | 48.2 | 21.7 | 21 | 75.6 | |
| PLL10-G4 | 10 | G1/2 | 9 | 50.2 | 21.7 | 24 | 89.1 | |
| PLL12-G1 | 12 | G1/8 | 5.5 | 47 | 22.9 | 19 | 70 | |
| PLL12-G2 | 12 | G1/4 | 6 | 47.5 | 22.9 | 19 | 73.3 | |
| PLL12-G3 | 12 | G3/8 | 7 | 52 | 22.9 | 21 | 85.3 | |
| PLL12-G4 | 12 | G1/2 | 9 | 54 | 22.9 | 24 | 100 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
