PH Single Banjo Plastic Poly Push In Tube to Pipe Adapter Connector Fittings
| MODEL | A | B | C | D | E | F | H1(Hex) | Weight(g) |
| PH04-M5 | 4 | M5*0.8p | 4 | 19 | 23.0 | 8 | 6.5 | |
| PH04-M6 | 4 | M6*1.0p | 4.5 | 19.5 | 23.0 | 8 | 6.6 | |
| PH04-01 | 4 | R1/8 | 7.5 | 24.5 | 21.4 | 10 | 12.2 | |
| PH04-02 | 4 | R1/4 | 9 | 30 | 23.1 | 14 | 24.5 | |
| PH06-M5 | 6 | M5*0.8p | 4 | 19 | 23.0 | 8 | 7.6 | |
| PH06-M6 | 6 | M6*1.0p | 4.5 | 19.5 | 23.0 | 8 | 7.6 | |
| PH06-01 | 6 | R1/8 | 7.5 | 24.5 | 23.6 | 10 | 13.7 | |
| PH06-02 | 6 | R1/4 | 9 | 30 | 25.3 | 14 | 24.7 | |
| PH06-03 | 6 | R3/8 | 10.5 | 34.5 | 27.2 | 19 | 45.5 | |
| PH06-04 | 6 | R1/2 | 12 | 41 | 30.1 | 24 | 81 | |
| PH08-01 | 8 | R1/8 | 7.5 | 24.5 | 25.0 | 10 | 14.4 | |
| PH08-02 | 8 | R1/4 | 9 | 30 | 26.7 | 14 | 25.5 | |
| PH08-03 | 8 | R3/8 | 10.5 | 34.5 | 28.6 | 19 | 45.8 | |
| PH08-04 | 8 | R1/2 | 12 | 41 | 31.5 | 24 | 80.8 | |
| PH10-01 | 10 | R1/8 | 7.5 | 24.5 | 29.2 | 10 | 16.5 | |
| PH10-02 | 10 | R1/4 | 9 | 30 | 30.9 | 14 | 27.9 | |
| PH10-03 | 10 | R3/8 | 10.5 | 34.5 | 31.1 | 19 | 48.3 | |
| PH10-04 | 10 | R1/2 | 12 | 41 | 34.0 | 24 | 83.2 | |
| PH12-02 | 12 | R1/4 | 9 | 30 | 32.7 | 14 | 31 | |
| PH12-03 | 12 | R3/8 | 10.5 | 34.5 | 34.6 | 19 | 47.8 | |
| PH12-04 | 12 | R1/2 | 12 | 41 | 37.5 | 24 | 86.3 |
| MODEL | A | B | C | D | E | F | H1(Hex) | Weight(g) |
| PH04-G1 | 4 | G1/8 | 5.5 | 25 | 21.4 | 10 | 12 | |
| PH04-G2 | 4 | G1/4 | 6 | 29.5 | 23.1 | 14 | 26 | |
| PH06-G1 | 6 | G1/8 | 5.5 | 25 | 23.6 | 10 | 14.2 | |
| PH06-G2 | 6 | G1/4 | 6 | 29.5 | 25.3 | 14 | 26.2 | |
| PH06-G3 | 6 | G3/8 | 7 | 34 | 27.2 | 19 | 35 | |
| PH06-G4 | 6 | G1/2 | 9 | 39 | 30.1 | 24 | 81.6 | |
| PH08-G1 | 8 | G1/8 | 5.5 | 25 | 25.0 | 10 | 14.9 | |
| PH08-G2 | 8 | G1/4 | 6 | 29.5 | 26.7 | 14 | 27 | |
| PH08-G3 | 8 | G3/8 | 7 | 34 | 28.6 | 19 | 43.3 | |
| PH08-G4 | 8 | G1/2 | 9 | 39 | 31.5 | 24 | 81.8 | |
| PH1O-G1 | 10 | G1/8 | 5.5 | 25 | 29.2 | 10 | 17.4 | |
| PH10-G2 | 10 | G1/4 | 6 | 29.5 | 30.9 | 14 | 29.4 | |
| PH10-G3 | 10 | G3/8 | 7 | 34 | 31.1 | 19 | 45.7 | |
| PH10-G4 | 10 | G1/2 | 9 | 39 | 34.0 | 24 | 83.8 | |
| PH12-G2 | 12 | G1/4 | 6 | 29.5 | 32.7 | 14 | 32.9 | |
| PH12-G3 | 12 | G3/8 | 7 | 34 | 34.6 | 19 | 48.7 | |
| PH12-G4 | 12 | G1/2 | 9 | 39 | 37.5 | 24 | 87.1 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
