MB68 Double Barbs Male Pipe Hose Barb Fittings For Polyethylene Tubing Mini Barb Adapter Connector
| PART NO. | TUBE O.D. | TUBE I.D. | PIPE THREAD | C HEX | L | FLOW DIA. D |
| MB68-32-02 | 5/32 | 0.096 | 1/8 | 7/16 | 0.84 | 0.062 |
| MB68-04-01 | 1/4 | 0.170 | 1/16 | 3/8 | 0.93 | 0.120 |
| MB68-04-02 | 1/4 | 0.170 | 1/8 | 7/16 | 0.97 | 0.120 |
| MB68-04-04 | 1/4 | 0.170 | 1/4 | 9/16 | 1.09 | 0.120 |
| MB68-04-10X32* | 1/4 | 0.170 | 10-32 | 1/4 | 0.71 | 0.093 |
| MB68-06-02 | 3/8 | 0.250 | 1/8 | 7/16 | 1.00 | 0.187 |
| MB68-06-04 | 3/8 | 0.250 | 1/4 | 9/16 | 1.13 | 0.187 |
| MB68-08-04 | 1/2 | 0.375 | 1/4 | 9/16 | 1.25 | 0.312 |
| MB68-08-06 | 1/2 | 0.375 | 3/8 | 11/16 | 1.28 | 0.312 |
| MB68-08-08 | 1/2 | 0.375 | 1/2 | 7/8 | 1.44 | 0.312 |
Interchangeability for reference
Parker : 28-5/32-2 28-4-1 28-4-2 28-4-4 28-4-10X32 28-6-2 28-6-4 28-8-4 28-8-6 28-8-8
Eaton/WeatherHead : 1068×2.5×2 1068x4x1 1068×4 1068x4x4 1068x6x2 1068×6 1068×8
Midland :32-150 32-151 32-153
Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Brass Mini-Barb/Dubl-Barb/Ring-Barb Fittings For Polyethylene Tubing
Interchange with Parker Dubl-Barb Fittings, Eaton Mini-Barb fittings.
Features
- Single or double barb design, no hose clamp need.
- Straights and shapes are manufactured from CA 360 or CA 345.
- Push-on design make the installation quickly without tube preparation.
- Barbed lip provide positive connection with excellent vibration characteristics.
- Compact size permits use in extremely tight areas.
Specification
- Temperature range depending on tubing
- Pressure will withstand burst pressures of plastic tubing.
|
DASH #
|
Tube O.D.
|
Tube I.D.
|
|
25
|
5/32
|
0.096
|
|
4
|
1/4
|
0.170
|
|
6
|
3/8
|
0.250
|
|
8
|
1/2
|
0.375
|
Applications
Use with high quality polyethylene tubing in low pressure temperature control circuits, test apparatus, lubricant, coolant lines, pneumatic circuits, vacuum and fluid systems.
Assembly Instructions
Cut tube squarely and simply Push the tubing over insert, Bottom the tubing against connector body.
