BUZ Cross Tube to Tube Brass Push In Fittings
Size | Size | A | B | Body Size |
BUZ-04 | 1/4″ | 1.03 | 2.06 | 0.37 |
BUZ-06 | 3/8″ | 1.06 | 2.12 | 0.5 |
attention please :Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
![Brass Push To Connect Fitting](http://www.fittings-adapters.com/uploads/photo/Push%20In%20Fittings/Brass_Push_Connect_Fitting_D.jpg)
Specification
O-Ring Seal | NBR (other materials are available upon request) |
Gripping Mechanism | Stainless Steel |
Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
Vacuum Duty | 29.5 Inch Hg |
Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
![]() |
![]() |
Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.