BUL Union Elbow Tube to Tube Brass Push Fit Fittings
| Mod. | A | C | F | M | SW |
| BUL-M04 | 4 | 5 | 10 | 21,5 | 9 |
| BUL-M06 | 6 | 4 | 12.5 | 26 | 10 |
| BUL-M08 | 8 | 5 | 14.5 | 29 | 12 |
Interchangeability for reference
Parker : 165PLM-4 165PLM-6 165PLM-8
Eaton/WeatherHead : 1165x4M 1165×5M 1165x6M 1165x8M 1165×10M 1165x12M
Midland : 20-150 20-151 20-152 20-155 20-153 20-154
Camozzi : ND655053-00 ND6550 04-00 ND6550 06-00 ND6550 08-00 ND6550 10-00
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
