BM Male Pipe Tube to Pipe Brass One Touch Fittings
| Mod. | A | D | C | F | G | H | L | SW | SW1 |
| MB-M04-G02 | 4 | Gl/8 | 3.8 | 8.8 | 13.2 | 5.5 | 18 | 12 | 2.5 |
| MB-M04-G04 | 4 | Gl/4 | 5.5 | 8.8 | 15.2 | 7 | 19.5 | 14 | 2.5 |
| MB-M05-G02 | 5 | Gl/8 | 3.8 | 9.8 | 132 | 5.5 | 19 | 12 | 5 |
| MB-M05-G04 | 5 | Gl/4 | 5.5 | 9.8 | 152 | 7 | 20 | 14 | 5 |
| MB-M06-G02 | 6 | Gl/8 | 6 | 11.7 | 132 | 5.5 | 22 | 12 | 4 |
| MB-M06-G04 | 6 | Gl/4 | 5.5 | 11.7 | 152 | 7 | 21 | 14 | 4 |
| MB-M06-G06 | 6 | G5/8 | 6.5 | 11.7 | 20.5 | 8 | 22.5 | 19 | 4 |
| MB-M08-G02 | 8 | Gl/8 | 7.5 | 15.7 | 152 | 5.5 | 25 | 14 | 5 |
| MB-M08-G04 | 8 | Gl/4 | 6.5 | 15.7 | 15.2 | 7 | 24 | 14 | 6 |
| MB-M08-G06 | 8 | G5/8 | 6 | 13.7 | 20.5 | 8 | 23.5 | 19 | 6 |
| MB-M08-G08 | 8 | Gl/2 | 7.5 | 13.7 | 24.5 | 9 | 25 | 22 | 6 |
| MB-M10-G04 | 10 | Gl/4 | 8.3 | 15.4 | 18.5 | 7 | 28.5 | 17 | 7 |
| MB-M10-G06 | 10 | G5/8 | 5.3 | 15.4 | 20.5 | 8 | 25.5 | 19 | 8 |
| MB-M10-G08 | 10 | Gl/2 | 4.8 | 16 | 24.5 | 9 | 25 | 22 | 8 |
| MB-M12-G04 | 12 | Gl/4 | 10.3 | 18.3 | 20.5 | 7 | 29.5 | 19 | 7 |
| MB-12-G10 | 12 | G5/8 | 9,3 | 18,5 | 20,5 | 8 | 28,5 | 19 | 9 |
| MB-12-G08 | 12 | Gl/2 | 5,8 | 18,3 | 24,5 | 9 | 25 | 22 | 10 |
| MB-M14-G06 | 14 | G3/8 | 10,3 | 20,5 | 24,5 | 8 | 30,5 | 22 | 9 |
| MB-M14-G08 | 14 | Gl/2 | 63 | 20,5 | 24,5 | 9 | 26,5 | 22 | 12 |
| MB-M16-G08 | 16 | Gl/2 | 9 | 23,5 | 26,5 | 9 | 32 | 24 | - |
| MB-M16-G12 | 16 | G3/4 | 3,5 | 23,5 | 27,3 | 9 | 26,5 | 24 | - |
Interchangeability for reference
Parker : 68PLM-4M-0 68PLM-4M-2 68PLM-4M-4 68PLM-4-0 68PLM-4-2 68PLM-4-4 68PLM-4-6 68PLM-6-2 68PLM-6-4 68PLM-6-6 68PLM-6-8 68PLM-8-6 68PLM-8-8
Eaton/WeatherHead :1168×2 1168x2x4 1168×2.5 1168×2.5×4 1168×4 1168x4x4 1168x4x6 1168×5 1168x5x4 1168x5x6 1168x6x2 1168×6 1168x6x6 1168x6x8 1168×8 1168x8x8
Midland :20-133 20-134
Camozzi :ND6512 04-32 ND6512 53-32 ND651053-02 ND6510 53-04 ND6510 04-02 ND6510 04-04 ND6510 04-06 ND6510 04-08*ND6510 06-02 ND6510 06-04 ND6510 06-06 ND6510 06-08 ND6510 08-04 ND6510 08-06 ND6510 08-08 ND6510 08-12 ND6510 10-06 ND6510 10-08 ND6510 12-06*ND6510 12-08 ND651012-12
| Mod. | A | D | F | G | H | L | SW | Weight(g) |
| S6510-04-02-LF | 4 | Gl/8 | 13.2 | 8.8 | 5.5 | 25 | 12 | 11 |
| S6510-06-02-LF | 6 | Gl/8 | 13.2 | 11.7 | 6 | 50.5 | 12 | 15 |
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
