BJU Stem Nipple Tube to Tube Brass Push Fit Fittings
| Mod. | A | G | C | F | L | T |
| BJU M04-G5 | 4 | 5 | 19 | 9 | 33 | 18 |
| BJU M04-G6 | 4 | 6 | 15.5 | 9 | 29.5 | 18 |
| BJU M04-G8 | 4 | 8 | 18 | 9 | 52 | 20.5 |
| BJU M05-G6 | 5 | 6 | 19 | 10 | 34 | 18 |
| BJU M05-G8 | 5 | 8 | 18 | 10 | 33 | 20.5 |
| BJU M06-G8 | 6 | 8 | 18 | 12.7 | 34 | 20.5 |
| BJU M06-G10 | 6 | 10 | 20.5 | 12.7 | 36.5 | 23 |
| BJU M06-G12 | 6 | 12 | 17.5 | 12.7 | 33.5 | 24 |
| BJU M08-G10 | 8 | 10 | 20.5 | 14 | 38 | 23 |
| BJU M08-G12 | 8 | 12 | 21.5 | 14 | 59 | 24 |
| BJU M010-G12 | 10 | 12 | 20.5 | 16.5 | 40.5 | 24 |
| BJU M010-G14 | 10 | 14 | 24.5 | 16.5 | 44.5 | 28 |
| BJU M012-G14 | 12 | 14 | 24.5 | 18.8 | 45.5 | 28 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
