BJ Stem Connector Tube to Tube Brass Push Fit Fittings 67PPL 286PP
67PPL 286PP
| Tube OD. A (mm) | Tube OD. B (mm) | Catalog Number | C | F | L | T |
| 4 | 6 | BJx4Mx6M | 15.5 | 9 | 29.5 | 18 |
| 6 | 8 | BJx6Mx8M | 18 | 13 | 34 | 20.5 |
| 6 | 10 | BJx6Mx10M | 20.5 | 13 | 36.5 | 23 |
| 8 | 10 | BJx8Mx10M | 20.5 | 14 | 39 | 23 |
| 8 | 12 | BJx8Mx12M | 21.5 | 14 | 39 | 24 |
Interchangeability for reference
Parker : 62PLMSP-4-6 62PLMSP-4-6M 62PLMSP-6-10M 62PLMSP-8-12M
Eaton/WeatherHead : 1109x4Mx6M 1109x6Mx8M 1109x6Mx10M 1109x8Mx10M 1109x8Mx12M
Midland : 20-510 20-511 20-512
Camozzi : ND6800 04-06
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
