BFB Bulkhead Female Pipe Tube to Pipe Brass One Touch Fittings
| Part# | Tube O.D. x Female NPTF | A | Hex | Approx. Wt Lbs. | List Price |
| BFB-04-02 | 1/4″ x 1/8″ | 1.19 | 0.68 | 0.08 | 15.26 |
| BFB-04-04 | 1/4″ x 1/4” | 1.36 | 0.75 | 0.1 | 19.16 |
| BFB-06-04 | 3/8″ x 1/4″ | 1.71 | 0.75 | 0.14 | 20.46 |
Interchangeability for reference
Parker :
Eaton/WeatherHead :
Midland :20-170 20-171 20-172
Camozzi :ND6593 53-04 ND6593 04-02 ND6593 04-04 ND6593 06-04 ND6593 06-06 ND6593 06-08 ND6593 08-06 ND6593 08-08
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
