BF Female Pipe Tube to Pipe Brass One Touch Fittings
| Mod. | A | D | C | F | G | L | P(min) | SW |
| BF-M04-M05 | 4 | M5 | 6.5 | 7.8 | 8.8 | 20.5 | 4.5 | 9 |
| BF-M04-G02 | 4 | Gl/8 | 10 | 9 | 13 | 24 | 6 | 12 |
| BF-M05-G02 | 5 | Gl/8 | 10 | 9.8 | 15 | 25 | 6 | 12 |
| BF-M06-G02 | 6 | Gl/8 | 10 | 11.7 | 13 | 26 | 6 | 12 |
| BF-M06-G04 | 6 | Gl/4 | 11.5 | 11.9 | 16.5 | 27.5 | 7 | 15 |
| BF-M08-G02 | 8 | Gl/8 | 9.5 | 13.7 | 15.2 | 27 | 6 | 14 |
| BF-M08-G04 | 8 | Gl/4 | 11.5 | 15.7 | 16.5 | 29 | 7 | 15 |
| BF-M10-G04 | 10 | Gl/4 | 11.3 | 15.4 | 18.5 | 31.5 | 7 | 17 |
Interchangeability for reference
Parker : 66PLM-4M-M5 66PLM-4M-2G 66PLM-4M-4G 66PLM-6M-2G 66PLM-6M-4G 66PLM8M-2G 66PLM-8M-4G 66PLM-10M-6G 66PLM-12M-6G 66PLM-12M-8G
Eaton/WeatherHead :1166×2 1166x2x4 1166×2.5 1166×2.5×4 1166×4 1166×4×4 1166×6 1166x6x6
Midland : 20-040 20-041 20-043 20-044
Camozzi :ND646353-02 ND646353-04 ND6463 04-02 ND6463 04-04 ND646304-06*ND6463 06-02 ND6463 06-04 ND646306-06 ND646306-08*ND6463 06-12*ND6463 08-02*ND6463 08-04 ND6463 08-06 ND6463 08-08 ND646308-12*ND6463 10-06*ND6463 10-08
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
