BBTS Male Branch Tee Tube to Pipe Brass One Touch Fittings
| Mod. | A | D | C | E | F | H | L | SW | SW1 |
| BBTS-M5-M5 | 4 | M5 | 5.5 | 12.5 | 9 | 4 | 35 | 8 | 8 |
| BBTS-M4-G02 | 4 | Gl/8 | 3.5 | 14.5 | 9 | 6 | 35 | 8 | 12 |
| BBTS-M5-M5 | 5 | M5 | 5.5 | 12.5 | 10 | 4 | 41 | 9 | 8 |
| BBTS-M6-G02 | 6 | Gl/8 | 4 | 15 | 12.7 | 6 | 40 | 9 | 12 |
| BBTS-M6-G04 | 6 | Gl/4 | 4 | 16 | 12.7 | 7 | 40 | 9 | 15 |
| BBTS-M8-G02 | 8 | Gl/8 | 5 | 16 | 14.2 | 6 | 45 | 11 | 12 |
| BBTS-M8-G04 | 8 | Gl/4 | 5 | 17 | 14.2 | 7 | 45 | 11 | 15 |
| BBTS-M8-G06 | 8 | G5/8 | 5 | 17 | 14.2 | 7 | 45 | 11 | 19 |
| BBTS-M10-G04 | 10 | Gl/4 | 5.8 | 19.5 | 16.5 | 7 | 52 | 15 | 15 |
| BBTS-M10-G06 | 10 | G5/8 | 5.8 | 19.5 | 16.5 | 7 | 52 | 13 | 19 |
| BBTS-M12-G04 | 12 | Gl/4 | 7.3 | 20 | 19.5 | 7 | 53 | 15 | 17 |
| BBTS-M12-G06 | 12 | G5/8 | 7.3 | 20.5 | 19.5 | 7 | 53 | 15 | 19 |
Interchangeability for reference
Parker : 172PLM-4M-2R 172PLM-6M-2R 172PLM-6M-4R 172PLM-8M-2R 172PLM-8M-4R 172PLM-10M-4R 172PLM-10M-6R 172PLM-12M-6R 172PLM-14M-8R
Eaton/WeatherHead : 1172x4Mx2PTS 1172x5Mx2PTS 1172x5Mx4PTS 1172x6Mx2PTS 1172x6Mx4PTS 1172x8Mx2PTS 1172x8Mx4PTS 1172x8Mx6PTS 1172x10Mx4PTS 1172x10Mx6PTS 1172x12Mx4PTS 1172x12Mx6PTS 1172x12Mx8PTS
Midland : 20-103 20-104 20-109 20-105 20-106 20-107 20-108 20-110 20-111
Camozzi : ND6430 53-02 ND643053-04 ND6430 04-02 ND6430 04-04 ND6430 04-06 ND6430 06-02 ND6430 06-04 ND6430 06-06 ND6430 06-08 ND6430 08-04 ND6430 08-06 ND6430 08-08 ND6430 10-06*IND6430 10-08
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
