69 Male Adapter Elbow SAE # 060202BA Brass Compression Fittings 69 269C BSE1 169C
SAE 060202BA 69 269C BSE1 169C
| PART# | TUBE O.D*MALE NPTF | N | M |
| 69-02-02 | 1/8*1/8 | .68 | .59 |
| 69-03-02 | 3/16*1/8 | .68 | .62 |
| 69-03-04 | 3/16*1/4 | .85 | .61 |
| 69-04-02 | 1/4*1/8 | .75 | .62 |
| 69-04-04 | 1/4*1/4 | .91 | .65 |
| 69-04-06 | 1/4*3/8 | .93 | .72 |
| 69-04-08 | 1/4*1/2 | 1.11 | .82 |
| 69-05-02 | 5/16*1/8 | .71 | .67 |
| 69-05-04 | 5/16*1/4 | .82 | .66 |
| 69-05-06 | 5/16*3/8 | .93 | .81 |
| 69-05-08 | 5/16*1/2 | 1.12 | .82 |
| 69-06-02 | 3/8*1/8 | .72 | .72 |
| 69-06-04 | 3/8*1/4 | .88 | .75 |
| 69-06-06 | 3/8*3/8 | .93 | .81 |
| 69-06-08 | 3/8*1/2 | 1.18 | .87 |
| 69-08-04 | 1/2*1/4 | .97 | .88 |
| 69-08-06 | 1/2*3/8 | 1.06 | .88 |
| 69-08-08 | 1/2*1/2 | 1.13 | .94 |
| 69-08-12 | 1/2*3/4 | 1.25 | 1.16 |
| 69-10-06 | 5/8*3/8 | 1.25 | 1.06 |
| 69-10-08 | 5/8*1/2 | 1.31 | 1.06 |
| 69-12-08 | 3/4*1/2 | 1.31 | 1.19 |
| 69-12-12 | 3/4*3/4 | 1.38 | 1.19 |
nterchangeability for reference
Parker : 169c-2-1 269c22 169c-3-1 169c3-2 269c3-2 169c3-4 169C-4-2 269C-4-2 [169C-4-4 269C-4-4 169C-4-6 19c-5-2. 269C52 [169C-5-4 269C5-4 169C-5-6 169C-6-2 269C6-2*169C-6-4 269C6-4 19c-6-6 269C6-6 169c-6-8 269C7-6 169-8-4·169c-8-6 169c-8-8 169C-10-8 169C-128 169C-1212
Eaton/WeatherHead : 69x2x1 69×2 69×3 69×4 69×4×4 69×5 69x5x4 69x6x2 69×6 69x6x6 69x6x8 69×7·69x8x4 69×8 69x8x8 69×10 69×12*69x12x12
Midland : 18-220 18-22OB*18-221 18-221B*18-223 18-224 18-224B*18-225 18-225B*18-226 18-227 18-228 18-228B*18-229 18-229B*18-230 18-231 18-232 18-232B*18-233 18-233B*18-234 18-234B*18-235 18-235B*18-248 18-247 18-236 18-237 18-237B*18-238 18-238B*18-239 18-240 18-241 18-241B*18-242 18-243 18-245 18-246
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.
Brass Compression Fittings & Adapters
Applications
Compatible with copper, brass, aluminum and thermoplastic tubing for instrumentation, hydraulic and pneumatic systems like typical fluid air, oil, water, lubricant and other applications.
Note: When use with thermoplastic tubing, a brass insert is required for support.
Features
- Construction – Three piece unit: body, nut (available with long or short nut) and sleeve. Extruded and Forged Configuration.
- Vibration resistance – Fair vibration resistance with short nut, The long nut can be used for greater vibration application.
- Advantages – Low cost. Easy to assemble without special tube prep, no flaring.Broad selection of styles and sizes.
Specification
- Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
- Working Pressure: up to 2000 PSI with a 4:1 safety factor depending on tube sizes. When using plastic tubing, use the working pressure for type used.
Assembly Instructions
- Cut tubing to desired length.
- Slide nut and then sleeve on tube. Threaded end “A” of nut must face out.
- Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder.
- Lubricate threads and assemble to fitting body.
- Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart (For Fractional Tubes) below.
|
TUBE SIZE
|
Additional Turns From Hand Tight
|
|
1/8” thru 1/4”
|
1-1/4
|
|
5/16”
|
1-3/4
|
|
3/8” thru 1”
|
2-1/4
|
US Brass Compression Fittings & Adapters
- Extruded Bar Stock, Hex Forging Blank, Fractional Tube Dia & NPT Thread Mainly.
Euro Brass Compression Fittings & Adapters
- Extruded Bar Stock, Round Forging Blank, Nickel-Plated, Metric Tube Dia & BSP Thread Mainly.
