68RB Male Connector 68ABS 09155 3380B-Y8 387 Air Brake Hose Ends Brass Fittings
、
68RB 68ABS 09155 3380B-Y8 387
| PART# | TUBE I.D × MALE NPTF | C | D | M |
| 68RB-06-04 | 3/8×1/4 | 31/32 | .281 | 1.91 |
| 68RB-06-06 | 3/8×3/8 | 31/32 | .281 | 1.91 |
| 68RB-06-08 | 3/8×1/2 | 31/32 | .281 | 2.06 |
| 68RB-08-06 | 1/2×3/8 | 1-1/8 | .390 | 1.91 |
| 68RB-08-08 | 1/2×1/2 | 1-1/8 | .390 | 2.07 |
Interchangeability for reference
Parker : 68RB-6-4 68RB-6-6 68RB-6-8 68RB-8-6 68RB-8-8
Eaton/WeatherHead :
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.
DOT Air Brake Fittings For Rubber Tubing (Hose Ends)
Conformance – Meets D.O.T. FMVSS571.106 standards when used with SAE J1402 Air brake rubber hose.
Applications
Use with SAE J1402 rubber hose for connection in air brake systems.
Features
- Construction – Three piece unit: body, nut and sleeve. Extruded(Brass CA360 or CA345) Configuration.
- Vibration resistance – Fair resistance.
- Advantages – Easy to assemble and disassemble (no tube preparation or flaring required.)
Specification
- Temperature Range: Fittings will withstand variations from -40°F to +120°F (-40°C to +48°C)
- Working Pressure: Maximum operating pressure of 125 psi.
Assembly Instructions
- Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
- Push and bottom hose into fitting.
- Screw nut until it contacts body hex.
Note: When reassembling fitting, body and nut should be inspected. Only reuse if parts are in proper condition. Sleeves should never be reused.
Midland : 38-333 38-334 38-335 38-336 38-337
