3220 Hex Bushing SAE# 130140 US Brass Pipe fittings & Adapters 373 3220 209P 110A 110B

Short Description:

Product Detail

Product Tags

*REF,SAE NO.130140 373 3220 209P 110A 110B

PART#	Thread size	C	D	L
3220L-04-02	F1/4×M1/8	9/16	.32	.62
3220-04-02	F1/4×M1/8	9/16	.32	.75
3220-06-02	F3/8×M1/8	11/16	.337	.75
3220L-06-04	F3/8×M1/4	11/16	.435	.69
3220-06-04	F3/8×M1/4	3/4	.435	.75
3220-08-02	F1/2×M1/8	7/8	.56	.87
3220L-08-04	F1/2×M1/4	7/8	.56	.87
3220-08-04	F1/2×M1/4	7/8	.56	1.0
3220L-08-06	F1/2×M3/8	7/8	.56	.87
3220-08-06	F1/2×M3/8	7/8	.56	1.0
3220-12-02	F3/4×M1/8	1-1/8	.74	.94
3220-12-04	F3/4×M1/4	1-1/8	.708	.94
3220-12-06	F3/4×M3/8	1-1/8	.708	.94
3220-12-08	F3/4×M1/2	1-1/8	.708	.94
3220-16-04	F1″×M1/4	1-3/8	.95	1.12
3220-16-06	F1″×M3/8	1-3/8	.95	1.12
3220-16-08	F1″×M1/2	1-3/8	.95	1.12
3220-16-12	F1″×M3/4	1-3/8	.95	1.31

Interchangeability for reference

Parker : 209P-4-2, 209P-6-2, 209P-6-4, 209P-8-2, 209P-8-4, 209P-8-6, 209P-12-2, 209P-12-4, 209P-12-6, 209P-12-8, 209P-16-8, 209P-16-12

Eaton : 3220x4x2, 3220x6x2, 3220x6x4, 3220x8x2, 3220x8x4, 3220x8x6, 3220x12x6, 3220x12x8

Midland : 28-102L, 28-102, 28-103, 28-104L, 28-104, 28-105L, 28-105, 28-106L, 28-106, 28-107L, 28-107, 28-108, 28-109L, 28-110L, 28-11IL, 28-111, 28-112, 28-113, 28-114, 28-115

Part#	Thread sizeNPTF MxF	A	Hex	Approx.Wt.Lbs.
28-102L	1/4″x 1/8″	0.62	0.56	0.02
28-102	1/4″x 1/8″	0.75	0.56	0.04
28-103	3/8″”x 1/8″	0.75	0.68	0.05
28-104L	3/8″x1/4″	0.69	0.68	0.03
28-104	3/8″x 1/4″	0.75	0.75	0.05
28-105L	1/2″x1/8″	0.81	0.81	0.08
28-105	1/2″x1/8″	1	0.87	0.1
28-106L	1/2″x1/4″	0.81	0.81	0.08
28-106	1/2″x 1/4″	1	0.87	0.11
28-107L	1/2″x3/8″	0.81	0.81	0.05
28-107	1/2″x 3/8″	1	0.87	0.1
28-108	3/4″x1/8″	0.94	1.06	0.2
28-109L	3/4″x1/4″	0.94	1.06	0.18
28-110L	3/4″x3/8″	0.94	1.06	0.15
28-111L	3/4″x1/2″	0.94	1.06	0.11
28-111	3/4″x12″	1	1.12	0.14
28-112	1″x1/4″	1.15	1.37	0.32
28-113	1″x3/8″”	1.12	1.37	0.3
28-114	1″x1/2″	1.31	1.44	0.29
28-115	1″x3/4″	1.31	1.37	0.2

attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.

Brass Compression Fittings & Adapters

Applications

Compatible with copper, brass, aluminum and thermoplastic tubing for instrumentation, hydraulic and pneumatic systems like typical fluid air, oil, water, lubricant and other applications.
Note: When use with thermoplastic tubing, a brass insert is required for support.

Features

Construction – Three piece unit: body, nut (available with long or short nut) and sleeve. Extruded and Forged Configuration.
Vibration resistance – Fair vibration resistance with short nut, The long nut can be used for greater vibration application.
Advantages – Low cost. Easy to assemble without special tube prep, no flaring.Broad selection of styles and sizes.

Specification

Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
Working Pressure: up to 2000 PSI with a 4:1 safety factor depending on tube sizes. When using plastic tubing, use the working pressure for type used.

Assembly Instructions

Compression Tube Fittings

Cut tubing to desired length.
Slide nut and then sleeve on tube. Threaded end “A” of nut must face out.
Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder.
Lubricate threads and assemble to fitting body.
Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart (For Fractional Tubes) below.